Call : +918068091970
Home » Products » Isolated Signal Conditioner » Hart To Modbus Gateway

Hart To Modbus Gateway

Hart To Modbus Gateway
Hart To Modbus Gateway
Send Inquiry
Product Code : 00
Price And Quantity
  • Minimum Order Quantity
  • 1
  • Unit of Measure
  • Unit/Units
  • Price Range
  • 3000.00 - 6000.00 INR
Product Specifications
  • Material
  • Plastic
  • Power
  • 1 W Siemens Volt (S )
  • Temperature
  • -25 ℃ ~ +75 ℃ Fahrenheit (oF)
  • Voltage
  • +10 ~ +30 VDC Siemens Volt (S )
  • Size
  • 72 mm x 35 mm x 121 mm (W x L x H)
Product Description
The HRT-710 / HRT-310 Gateway is specially designed for the master device of HART protocol. It allows the Modbus master to access the HART devices. These HART devices may be a transmitter, an actuator and so forth. In addition, we also provide the software utility, HG_Tool, for module configuration and HART device diagnosis. By using these modules, users can integrate their HART devices into Modbus network easily and quickly.

Features :-

  • Support HART Short/Long frame
  • Support HART Burst mode
  • Allow two HART Masters
  • Working in point-to-point or multi-drop HART mode
  • Connecting up to 15 HART modules
  • Support Modbus RTU and ASCII format
  • Support Modbus Slave mode
  • Support firmware update via Com Port. (FW_v1.2 and HW_v1.2)
  • Support on-line replacement of HART devices. (FW_v1.5)
  • Support acquire Long Frame Address automatically (FW_v1.5)
  • Isolated COM Port : RS-232/422/485
  • Provide LED indicators
  • Built-in Watchdog
  • DIN Rail or Wall Mounting

Applications :-

  • Industrial Automation
  • Factory Automation
  • Process Automation
  • Etc

Specification :

Hardware

Watchdog

Watchdog IC

ESD Protection

4 kV class A

UART Interface

COM 1

RS-232(3 wire)/RS-422/RS-485

COM 1 Connector

9-pin screwed terminal block

Baud Rate (bps)

1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200

Protocol

Modbus RTU / Modbus ASCII

HART Interface

HART Channel

1

HART Interface

2-pin screwed terminal block

HART Device

2-wired or 4-wired HART devices

HART Topology

Point to Point or Multi-Drop

HART Data

Only Digital Data

HART Frame Type

Short and Long Frame

Burst Mode

Supported

Max. HART Device

15

Loop Resistor

250 Ω resistor by Jumper

Isolation

Follow UL1577 Spec.

Power

Power supply

Unregulated +10 ~ +30 VDC

Protection

Power reverse polarity protection, Over-voltage brown-out protection

Power Consumption

1W

Mechanism

Installation

DIN-Rail or Wall Mounting

Dimensions

72 mm x 35 mm x 121 mm (W x L x H) Detail

Environment

Operating Temp.

-25oC ~ +75oC

Storage Temp.

-30oC ~ +85oC

Humidity

5% ~ 95% RH, non-condensing

Trade Information
  • Supply Ability
  • 1000 Per Month
  • Delivery Time
  • 2 ~ 3 Week
  • Sample Available
  • Yes
  • Main Domestic Market
  • All India

NIMBUS TECHNOLOGIES
X


Back to top
NIMBUS TECHNOLOGIES All Rights Reserved.(Terms of Use)
Developed and Managed by Infocom Network Ltd.