Cookie Img
Nimbus Technologies
Send Inquiry Send SMS    Call Me Free
Banner
Home » Products » Isolated Signal Conditioner

Isolated Signal Conditioner

We provide Isolated Signal Conditioner which is efficient in manipulating the analog signal thereby preparing it for next stage processing. From our wide range of control engineering products, we have come with technically advanced Isolated Signal Conditioner that take the route of sensing stage to signal conditioning stage and later to the processing stage. As a professional manufacturer, wholesaler, supplier, and distributor in the Control Engineering Industry, we provide advanced and easy to set-up products featuring micro-controller and ADC, known as analog-to-digital converter. Isolated Signal Conditioner is equipped with amplifiers and peak detectors to transform the signal from the source to the measuring device.

Key Features:

1) The product contains magnetic or optic isolation, depending on the site requirement.
2) No physical connection is required, as it can efficiently transform signal from the media like voltage to a magnetic field.
3) Efficiently filter out validated data.
4) It can also increase the resolution of the signal for better readability.
Strain Gauge
close
Strain Gauge
02
This Strain Gauge is manufactured using optimum grade components and cutting edge techniques under the surveillance of our experienced professionals. The offered gauge is widely used to measure strain or strain in a work piece. Additionally, we provide this highly operational, easy to use and compact size Strain Gauge to the clients at market leading prices within a stipulated time frame.
Multifunction Power Meter
close
Multifunction Power Meter
46
This Multifunction Power Meter is extensively used in commercial areas for measuring current, voltage and frequency in an effective manner. With the help of avant-garde tools and techniques, the offered meter is manufactured using quality approved components by our ingenious professionals. In addition, this Multifunction Power Meter is highly durable, user friendly, compact in size and provides accurate measurement.
LCD Display Multifunction Power Meter
close
LCD Display Multifunction Power Meter
46
LCD Display Multifunction Power Meter is required for monitoring voltage & kWh consumption, readings, and monitoring of single & three phase current. It is ideal to be used in switchgear distribution systems, control panels of industrial instruments, and energy management applications. This meter is used for power quality analysis and is highly appreciated for providing accurate results & programmable keyboard for ease of the user. It displays information in digital form with clear visibility.
Voltage & Current Meter
close
Voltage & Current Meter
47
Voltage & Current Meter is used for testing power supply readings in different electrical devices. It also finds its application for MCC panels, switchgear, and various industrial machines. This meter is provided with a digital display screen which shows precise current readings. It can easily be scaled without the use of any electronic calibrator.  This meter can be parallelly placed with a resistor for measuring large currents.
USB To RS232/422/485 Converter
close
USB To RS232/422/485 Converter
01

Specification

  • Fully Compliant with the USB 1.1/2.0/3.0
  • 3000 VDC Isolation Protection on the RS-232/422/485 side
  • ESD Protection for the RS-232/422/485 Data Line
  • Transmission speed up to 921.6 kbps (For I-7561U)
  • Operating Temperatures, -25 °C ~ +75 °C
RS232 To RS485 Converter
close
RS232 To RS485 Converter
02

Specification

  • Power Input, +10 ~ +30 VDC
  • 3000 VDC Isolation Protection on the RS-485 side
  • Transmission Speed of up to 115200 bps
  • Operating Temperatures, -25 °C ~ +75 °C
Analog Input DAS Module
close
Analog Input DAS Module
03

Specification

  • Model : ET-7005
  • Channel : 8
  • Sensor Input : Thermistor
  • Type : Open Collector
IIOT Controller
close
IIOT Controller
05
WISE (Web Inside, Smart Engine) is a product series developed by ICP DAS that functions as control units for use in remote logic control and monitoring in various industrial applications.
Modbus Analog DAS Module
close
Modbus Analog DAS Module
06

Specification

  • Model : M-7017
  • High Resolution: 16-bit
  • Open Wire Detection for 4 ~ 20 mA
  • Wide Operating Temperature Range: -25 ~ +75°C
Hart To Modbus Gateway
close
Hart To Modbus Gateway
07

Specification

  • Power supply : +10 ~ +30 VDC
  • Power Consumption :1W
  • Operating Temp. :-25oC ~ +75oC
  • Storage Temp. :-30oC ~ +85oC
  • Humidity :5% ~ 95% RH
Intelligent IOT Converter
close
Intelligent IOT Converter
09
WISE (Web Inside, Smart Engine) is a product series developed by ICP DAS that functions as control units for use in remote logic control and monitoring in various industrial applications.
USB To RS485 Converter
close
USB To RS485 Converter
10

Specification

  • Fully Compliant with the USB 1.1/2.0/3.0
  • 3000 VDC Isolation Protection on the RS-232/422/485 side
  • ESD Protection for the RS-232/422/485 Data Line)
  • Operating Temperatures, -25 °C ~ +75 °C
USB485 is a kind of USB to RS-485/422 industrial intelligent converter. It is the best solution for the communication between USB and RS-485/422. Compared with RS-232 to RS-485/422 converter, USB to RS-485/422 converter has many advantages.
Interface converter (Model485P)
close
Interface converter (Model485P)
11

Specification

  • 9VDC power input, 2500V optical isolation
  • 1500W surge protection, 15KV ESD protection
  • 1800m transfer distance (115200bps)
  • RS-485/RS-422 
12

Specification

  • 9VDC power input, 2500V optical isolation
  • 1500W surge protection, 15KV ESD protection
  • 1800m transfer distance (115200bps)
  • RS-485/RS-422 


Contact Details
Trust Stamp
Product Showcase
NIMBUS TECHNOLOGIES All Rights Reserved.(Terms of Use)
Developed and Managed by Infocom Network Ltd.