भाषा बदलें
हमें कॉल करें : 08045812107
Modbus RTU/ASCII  to HART  gateway with 2 HART ports Modbus RTU/ASCII  to HART  gateway with 2 HART ports Modbus RTU/ASCII  to HART  gateway with 2 HART ports Modbus RTU/ASCII  to HART  gateway with 2 HART ports Modbus RTU/ASCII  to HART  gateway with 2 HART ports Modbus RTU/ASCII  to HART  gateway with 2 HART ports Modbus RTU/ASCII  to HART  gateway with 2 HART ports
Modbus RTU/ASCII  to HART  gateway with 2 HART ports
Modbus RTU/ASCII  to HART  gateway with 2 HART ports Modbus RTU/ASCII  to HART  gateway with 2 HART ports Modbus RTU/ASCII  to HART  gateway with 2 HART ports Modbus RTU/ASCII  to HART  gateway with 2 HART ports Modbus RTU/ASCII  to HART  gateway with 2 HART ports Modbus RTU/ASCII  to HART  gateway with 2 HART ports

IIoT एज कंट्रोलर (मेटल केस) (3G कम्युनिकेशन का समर्थन करें)

उत्पाद विवरण:

  • प्रॉडक्ट टाइप Gateway
  • चैनल की संख्या 2
  • कॉल कंट्रोल प्रोटोकॉल Modbus RTU/ASCII
  • स्टोरेज टेम्परेचर सेल्सियस (oC)
  • नेटवर्क कनेक्शन के तरीके USB
  • पावर वाट (w)
  • आयाम (एल* डब्ल्यू* एच) मिलीमीटर (mm)
  • अधिक देखने के लिए क्लिक करें
X

IIoT एज कंट्रोलर (मेटल केस) (3G कम्युनिकेशन का समर्थन करें) मूल्य और मात्रा

  • 10

IIoT एज कंट्रोलर (मेटल केस) (3G कम्युनिकेशन का समर्थन करें) उत्पाद की विशेषताएं

  • Modbus RTU/ASCII
  • 115mm
  • 10~30VDC
  • Metal
  • 2
  • वाट (w)
  • USB
  • सेल्सियस (oC)
  • HART communication range
  • 250g
  • Gateway
  • Black
  • 2 HART ports
  • Compact
  • मिलीमीटर (mm)

IIoT एज कंट्रोलर (मेटल केस) (3G कम्युनिकेशन का समर्थन करें) व्यापार सूचना

  • प्रति महीने
  • दिन
  • Device
  • CE/FCC/ROHS

उत्पाद वर्णन

Features

  • Support two HART channels
  • Support HART Short/Long frame
  • Support Modbus RTU and ASCII format
  • Support HART network Loop Power
  • Built-In HART network resistor 250 ohm (2W)
  • Provide LED indicators
  • Support Windows / WinCE / Linux 9K series PAC
  • Free HG_Tool for module configuration
  • Support module configuration via USB
  • Support RST button for module reboot

Introduction

I-9720 is a Modbus RTU/ASCII slave to HART master gateway with two HART ports. It can be used in Windows / WinCE / Linux 9K series PAC for Modbus master to get HART device data easily. It provides adjustable HART loop power (27VDC ) and loop resistor (250 ohm, 2W) to simplify HART network wiring. Free HG_Tool is used for module configuration and HART device data monitor quickly.

Software
Driver Windows XP / 7 / 8 / 10 / 11 (32/64 bit)
LED Indicators
Status PWR/RUN/E0/E1
COM Ports
Ports Backplane (Virtual COM)
Baud Rate 1200 115200 bps
Data Format N/O/E(parity), 8(data bit), 1/2(stop bit)
Protocol Modbus RTU/Modbus ASCII
USB
Specification USB 1.1 and 2.0 standard
Connector USB Type C
Virtual COM Parameter 1200 115200 bps, N/O/E(parity), 8(data bit), 1/2(stop bit)
HART
Ports 2
Device 2-wired or 4-wired HART devices
Topology Point to Point or Multi-Drop
Data Only Digital Data
Frame Type Short and Long Frame
Burst Mode Supported
Max. HART Device 15
Loop Resistor 250ï resistor by Dip-Switch
Isolation UL1577 Spec.
Protocol HART
Loop Power Yes (module provides +27VDC)
Power
Reverse Polarity Protection Power reverse polarity protection, Over-voltage brown-out protection
Input Range Unregulated +10 +30 VDC
Consumption Max. 2.3 W (Point to Point HART wiring)
Max. 4.5 W (Multi-drop HART wiring)
Mechanical
Dimensions (mm) 31mm x 134mm x 143mm (W x L x H)
Installation Slot
Environment
Operating Temperature -25 +75 C
Storage Temperature -30 +80 C
Humidity 10% 90% RH, non-condensing
Tell us about your requirement
product

Price:  

Quantity
Select Unit

  • 50
  • 100
  • 200
  • 250
  • 500
  • 1000+
Additional detail
मोबाइल number

Email

HART Modules अन्य उत्पाद



Back to top