आम्हाला कॉल करा : 08045812107
HART to Fiber Converter
35000.0 INR/तुकडा
उत्पादन तपशील:
- उत्पादनाचा प्रकार HART to Single Mode Fiber Converter
- स्टोरेज तापमान सेल्सिअस (ओसी)
- आकार 33.0 x 126 x 101 (W x L x H)
- वीज पुरवठा Electric
- रंग Grey
- अधिक पाहण्यासाठी क्लिक करा
X
किंमत आणि प्रमाण
- 1
उत्पादन तपशील
- सेल्सिअस (ओसी)
- Grey
- HART to Single Mode Fiber Converter
- 33.0 x 126 x 101 (W x L x H)
- Electric
व्यापार माहिती
- प्रति महिना
- दिवस
- Devices
- CE/FCC/ROHS
उत्पादन वर्णन
Features
- Support HART Short/Long frame
- Support HART Burst mode
- Support point-to-point or multi-drop HART mode
- Support connecting up to 15 HART slave devices
- Allow two HART masters
- Provide HC_Tool utility for module configuration
- Support firmware update via ComPort
- Fiber broken line detection
- Fiber Type: SC ; Single mode ; 100 Base-FX
- Fiber max. transmission distance up to 30 km
- 4KV ESD Protection
- Built-in Watchdog
- Selectable 250Î loop resistor
- The HART port with the same Group ID can communicate with each other
Introduction
The HRT-227CS is a HART to Fiber converter paired used to extend HART communication distance via single mode fiber optic transmission medium. In order to solve the problem between HART and fiber transmission medium, HRT-227CS is specially designed for converting the HART signal to fiber optic cables. Built-in a HART 250 Î loop resistor adjustable by dip switch. Therefore, users can make data collection and processing of HART network easier and quicker by applying HRT-227CS. In addition, we also provide the free HC_Tool utility for module configuration easily.
Applications
- Current Measuring
- Petrochemical Industry Application
- Environment Monitoring
- Tunnel Monitoring
- Monitor system
- Building Monitoring
LED Indicators | |
---|---|
Status | PWR, FB_Ack, FB_Err, HT_Err, HT_Tx and HT_Rx |
COM Ports | |
---|---|
Ports | RS-232 (TXD / RXD / GND) for configuration (1200, O, 8 ,1) |
Fiber | |
---|---|
Ports | SC Duplex type ; Single mode ; 100 Base-FX |
Fiber Cable | 8.3/125, 8.7/125, 9/125 or 10/125 |
Wavelength | 1310 nm |
TX Output | -15 dBm Min. -8 dBm Max. |
RX Sensitivity | -34 dBm Max. |
RX Overload | -5 dBm Max. |
Budget | 19 dBm |
HART | |
---|---|
Ports | 1 |
Data | Only Digital Data |
Loop Resistor | Selectable 250 Î loop resistor |
Isolation | UL1577 Spec. |
Protocol | 2-pin screwed terminal block (HART+, HART-) |
Power | |
---|---|
Reverse Polarity Protection | Power reverse polarity protection, Over-voltage brown-out protection |
Input Range | Unregulated +10 +30 VDC |
Consumption | 3W |
Mechanical | |
---|---|
Dimensions (mm) | 33.0 x 126 x 101 (W x L x H) |
Installation | DIN-Rail |
Environment | |
---|---|
Operating Temperature | -25 +75 C (-13 to 167F) |
Storage Temperature | -30 +80 C (-22 to 176F) |
Humidity | 10% 90% RH, Non-condensing |
Tell us about your requirement

Price: Â
Quantity
Select Unit
- 50
- 100
- 200
- 250
- 500
- 1000+
Additional detail
मोबाईल number
Email
HART Modules मध्ये इतर उत्पादने
![]() |
NIMBUS TECHNOLOGIES
सर्व हक्क राखीव.(वापरण्याच्या अटी) इन्फोकॉम नेटवर्क प्रायव्हेट लिमिटेड . द्वारे विकसित आणि व्यवस्थापित |