Single-Strand Media Converters
उत्पादन तपशील:
- माउंटिंग प्रकार DIN rail or panel mount
- वैशिष्ट्ये Single-strand fiber optic operation Compact design LEDs for status indication
- रिमोट कंट्रोल No
- कनेक्टिव्हिटी प्रकार Single-strand fiber optic and Ethernet
- नियंत्रण प्रकार None (media converter)
- वेग श्रेणी 10/100/1000 Mbps Ethernet
- ऑटोमेशन ग्रेड Standard
- अधिक पाहण्यासाठी क्लिक करा
किंमत आणि प्रमाण
- 10
उत्पादन तपशील
- No
- Single-strand fiber optic operation Compact design LEDs for status indication
- सेल्सिअस (ओसी)
- DIN rail or panel mount
- Plastic/Metal casing
- Single-strand fiber optic and Ethernet
- वॅट (प)
- 10/100/1000 Mbps Ethernet
- Standard
- None (media converter)
- Approximately 200 grams
- Varies (depends on fiber and Ethernet cable used)
- Fiber Converter Module
- IP40
- Gray
- व्होल्ट (v)
- Industrial Ethernet and fiber optic networking
- 1 year
- None
व्यापार माहिती
- प्रति महिना
- दिवस
- Device
- CE/FCC/ROHS
उत्पादन वर्णन
Features
Automatic MDI / MDI-X crossover for plug-and-play
Supports both 10/100 Mbps speed auto negotiation
Store-and-forward architecture
Reverse Polarity Protection
DIN-Rail
Introduction
The NS-200WDM Series of Single-Strand Fiber Converters supports Wavelength Division Multiplexing (WDM) technology that allows two independent data communication channels to transmit and receive over one standard, single mode, fiber optic line. This not only doubles your existing bandwidth, but also effectively reduces the cost of creating a new fiber optic infrastructure.
Important Note : You must purchase both NS-200WDM-A and NS-200WDM-B since these products work as a pair.
EMS Protection | |
---|---|
ESD (IEC 61000-4-2) | Yes |
LED Indicators | |
---|---|
Status | PWR, 10M, 100M, Link/Act, Full duplex/Half duplex(Fiber Port) |
Ethernet | |
---|---|
Ports | 1 x RJ-45, 10/100Base-TX |
Standards | IEEE802.3, 802.3u, 802.3x |
Processing Type | Store & forward wire speed switching |
MAC Table | 1024 |
Memory Bandwidth | 1.4 Gbps |
Isolation | 1500 Vrms 1 minute |
Fiber | |
---|---|
Ports | 1 x 100 Base-FX, SC connector |
Mode | Single-Mode |
Fiber Cable | 8.3/125, 8.7/125, 9/125 or 10/125 m |
Distance | 15 km, (9/125 m mrecommended) for full duplex |
Wavelength | TX: 1310 nm, RX: 1550 nm |
TX Output | -14 dBm Min. -8 dBm Max. |
RX Sensitivity | -31 dBm |
Power | |
---|---|
Reverse Polarity Protection | Yes |
Input Range | +12 +48 VDC (Non-isolation) |
Consumption | 0.12 A @ 24 VDC, +/- 5% arrowed with 100M Full duplex |
Mechanical | |
---|---|
Casing | Plastic |
Dimensions (mm) | 32.3 x 107 x 85 (W x L x H) |
Installation | DIN-Rail Mounting |
Environment | |
---|---|
Operating Temperature | 0 C +70 C |
Storage Temperature | -20 C +85 C |
Humidity | 10% 90% RH, non-condensing |

Price: Â
- 50
- 100
- 200
- 250
- 500
- 1000+
Fiber Optic Converter मध्ये इतर उत्पादने
![]() |
NIMBUS TECHNOLOGIES
सर्व हक्क राखीव.(वापरण्याच्या अटी) इन्फोकॉम नेटवर्क प्रायव्हेट लिमिटेड . द्वारे विकसित आणि व्यवस्थापित |