Thermocouple Input With CANOpen

उत्पादन वर्णन

FeaturesNMT SlaveNMT Error Control support Guarding and HeartbeatProvide default EDS filePassed the validation of CiA CANopen conformance test toolESD Protection 4 KV Contact for each channelSupport Power Supply +10 +30 VDCSupport CiA DS-301 v4.02, DSP-401 v2.1Support Dynamic PDOIntroductionCAN-2018C module follows the DS-301 version 4.02 and DSP-401 version 2.1. You can access the thermocouple input status and set the configuration by using standard CANopen protocol. CAN-2018C has passed the validation of the CiA CANopen Conformance Test tool. Therefore, you can use it with standard CANopen master easily by applying the EDS file. CAN-2018C has 8-channel thermocouple input. It can be used to various applications. By owing to the CANopen masters of ICP DAS, you can quickly build a CANopen network to approach your requirements. For अधिक माहितीrmation about the CANopen master interfaces and other CANopen products, please refer to the following web site, please refer to the following web site.CPU ModuleWatchdog TimerHardware watchdogLED IndicatorsStatus3 LEDs for PWR, RUN and ERRAnalog InputChannels8Sensor Type+/- 15mV, +/- 50mV, +/- 100mV, +/- 500mV, +/- 1V, +/- 2.5V+/-20mA,(Requires Optional External 125 Ohm Resistor)Thermocouple (J, K, T, E, R, S, B, N, C)Resolution16-bitAccuracy+/-0.1% FSRSampling Rate10 Samples/Sec. (Total)Input Impedance>400 kCommon Mode Rejection86 dBNormal Mode Rejection100 dBOvervoltage Protection240 VrmsIndividual Channel ConfigurationYesOpen Wire DetectionYesZero Drift+/- 10 V/ CSpan Drift+/- 25 ppm/ CIsolation3000 VDCCANopenBaud Rate10k 1MIsolation3000 VDC for DC-to-DC, 2500 Vrms for photo-coupleTerminal ResistorBuilt-in 120ProtocolCiA 301 v4.02, CiA 401 v2.1Node ID1 99No. of PDOs10 RxPDO, 10 TxPDOPDO ModeEvent Triggered, Remotely requested, Cyclic and acyclic SYNCError ControlNode Guarding protocol/Heartbeat ProducerNMTSlaveEMCY MessageYesPowerConsumption1.5 WMechanicalDimensions (mm)CAN-2018C, 33 x 99 x 78 (W x L x H)CN-1824, 29 x 43 x 83 (W x L x H)InstallationDIN-RailEnvironmentOperating Temperature-25 +75 CStorage Temperature-30 +80 CHumidity10 90% RH, Non-condensing