USB to CAN Converter

Product Description

Features

• Fully compliant with USB 1.1/2.0(Full Speed)
• Fully compatible with the ISO 11898-2 standard
• No external power supply is required as I-7565 takes it's power from the USB bus
• Transmission speed up to 1M bps for CAN and 921.6K bps for USB
• Support both CAN 2.0A and CAN 2.0B
• Built-in jumper to select 120 ohm terminal resister
• Power, data flow and error indicator for CAN and USB
• 1000 frames in CAN received buffer
• Watchdog inside
• Windows XP/7/10/11and Linux drivers support
• Able to configure the CAN baud rate for each channel using a rotary switch
• Extends the CAN transmission distance

Introduction

CAN (Controller Area Network) is a serial bus system especially suited to structure intelligent industry devices networks and build smart automatic control systems. The I-7565 is a cost-efficient device for coupling the CAN-bus to the PC using the standard USB interface by the MS-Windows XP, Win 7, Win 10, Win 11 and Linux operating systems. If you establish the connection between the I-7565 and the PC during the runtime of the computer, the PC automatically loads the relevant device driver (hot plug & play).

The following figure shows the application architecture for I-7565 modules. The PC can be the CAN host, monitor or HMI to access/control the CAN device through the CAN network by the I-7565 Converter. This module let you to communicate with CAN devices easily from PC with USB interface.